Guest moti_gorin Report post Posted May 12, 2008 Hello all i have a trail version of wapt 5.0. When i finished the test there is a graph that i didn't really understand. i attached the graph if you wil help me to figure it up!! Quote Share this post Link to post Share on other sites
Guest angela Report post Posted May 13, 2008 Hello all i have a trail version of wapt 5.0. When i finished the test there is a graph that i didn't really understand. i attached the graph if you wil help me to figure it up!! Hello! The green line on the graph shows the average response time of server to users' requests (avg response time). The black line with dots shows the number of users. The graph shows the average time of server response for each user. Please let me know why you marked some values in red? Is there something wrong with them? Quote Share this post Link to post Share on other sites
Guest moti_gorin Report post Posted May 13, 2008 Hey and 10x for the quick replay.. so.. if i understand what you explaind- My red mark is that at 1:40 minute when i had 20 user at the site they had 5 seconds of wating before the page is loaded... so i don't know why the graph isn't a straight line? at 00:30 time of the check the responed time was something like 9 seconds? and last thing how can convert scenario of wapt 3.0 to wapt 5.0?? thenk you very very much! Moti gorin Quote Share this post Link to post Share on other sites
Guest angela Report post Posted May 13, 2008 Hey and 10x for the quick replay.. so.. if i understand what you explaind- My red mark is that at 1:40 minute when i had 20 user at the site they had 5 seconds of wating before the page is loaded... so i don't know why the graph isn't a straight line? at 00:30 time of the check the responed time was something like 9 seconds? In the moments marked by you you have the average time of waiting for response from server 9 and 5 seconds. and last thing how can convert scenario of wapt 3.0 to wapt 5.0?? thenk you very very much! Moti gorin You can import a scenario from v3.0 to v5.0 Please click File - > Import... WAPT 3.0 scenario files have the extension .wts. Quote Share this post Link to post Share on other sites
Guest moti_gorin Report post Posted May 14, 2008 Thenk you very much fof the help! Quote Share this post Link to post Share on other sites
Guest angela Report post Posted May 14, 2008 You are welcome Quote Share this post Link to post Share on other sites
Guest moti_gorin Report post Posted May 14, 2008 Hello again.. Another Question: if i made a scenario that every 5 minute there are another 50 users why at the "Overall performance" graph there is no pick of 50 "pages/sec" every 5 minute? the 50 user aren't entering at the same minute? because at the graph is shown that the maximum pages per second is 20 (->300 users). Have a nice day Moti Quote Share this post Link to post Share on other sites
Guest angela Report post Posted May 15, 2008 Hello again.. Another Question: if i made a scenario that every 5 minute there are another 50 users why at the "Overall performance" graph there is no pick of 50 "pages/sec" every 5 minute? the 50 user aren't entering at the same minute? because at the graph is shown that the maximum pages per second is 20 (->300 users). Have a nice day Moti The matter is that the trial version supports only maximum of 20 virtual users. A registered version has no restrictions on the number of virtual users. This number is limited most of all by your computer's hardware configuration and operating system. Also, it strongly depends on the specific test scenario. An estimated number of simultaneously acting simulated users for the "average" test scenario and for the following standard hardware configuration: Intel Pentium III 1000 MHz PC, 256-512 MB RAM, 100 MB LAN should stand at about 500-1000. In some cases, WAPT can simulate up to 1500-1800 simultaneously acting users from a single computer. Quote Share this post Link to post Share on other sites
